Showing 6007 results

Architectural drawing on tracing paper showing part of the entrance elevation, in scale 1:50, from the left hand side of the graduation hall for Strathclyde University. For presentation purposes, this sheet has been drawn to be attached to the next item to complete the elevation/section panorama. The enlarged scale allows the architect to create as much architectural details within the entrance elevation as this design stage presents the technical study. This drawing comes with no materials indicated.

Architectural drawing on tracing paper showing part of an enlarged plan, in scale 1:50, from the upper lounge and gallery corner of the graduation hall for Strathclyde University, where the cross section in the previous item has been taken. For presentation purposes, this sheet has been drawn to be attached below the item on the right hand side to complete the whole presentation panorama. The enlarged scale allows the architect to create as much architectural details of the structural elements and construction system. This drawing comes with no materials indicated.
This sheet also includes the upper part of the enlarged section which will present the fifth item of the lower part on the left hand side of this whole panorama.

Material created during Christopher Platt's fifth year of studies including the full time (CF5) technical study based on year 4 design.

Architectural drawings on tracing paper of a technical study based on year 4 design including details sections and elevations.

Architectural drawings on tracing paper related to thesis project studying the Roman Catholic seminary & chaplaincy for Glasgow University and its new extension.

Architectural drawing on tracing paper showing the site plan in scale 1:500, situated at Glasgow University campus surrounded by University Avenue, Oakfield Avenue, Gibson Street, and Southpark Avenue. The site plan is presented with the north sign, the main building, the surrounding blocks and the landscape. The architect created these drawings with coloured presentation. The sheet also includes the elevation to University Avenue showing the whole design of the project with the new one and the other existing building within the site.

Architectural drawing on tracing paper showing the ground floor plan in scale 1:100, in which all the functional spaces have been identified with coded numbers, then addressed their titles, as below:
1 chapel, 2 sacristy, 3 lecture theatre, 4 projection, 5 store, 6 games, 7 chaplains' flat, 8 housekeeper, 9 priest's living/studying, 10 priest's bedroom, 11 guest suite, 12 reception rooms, reception, 14 entrance hall, 15 seminary entrance, 16 craft workshop, 17 boiler room, 18 laundry, 19 infirmary, and 20 courtyard.

Architectural drawing on tracing paper showing three isometric plans of the circulation and fire escapes from the second to first down to the basement floor, in scale 1:500, of the graduation hall for Strathclyde University. For presentation purposes, this sheet has been drawn to be attached below the second item on the left hand side to complete the whole presentation panorama. The fire escapes have been coloured with red to identify these from the other vertical circulations within the building. This sheet also includes the upper part of the enlarge section, in scale 1:20, which has been presented with the lower part of the third item on the left hand side of this whole panorama.

Architectural drawing on tracing paper showing part of a cross section, in scale 1:50, from the right hand side of the graduation hall for Strathclyde University. For presentation purposes, this sheet has been drawn to be attached to the previous item to complete the elevation/section panorama. The enlarged scale allows the architect to create as much architectural details as this design stage presents the technical study. This drawing comes with no materials indicated, but the drawing is coloured.

Architectural drawing on tracing paper showing an enlarged cross section, in scale 1:20, of the graduation hall for Strathclyde University. It includes the whole construction details for: pitched roof construction, internal ceiling to main hall, flat roof construction, external walls, cavity blockwork, typical internal wall finish, upper floor - upper lounge, ground floor - circulation area under gallery, and ground floor - hall floor. For presentation purposes, this sheet has been drawn to be attached below the third item on the left hand side to complete the whole presentation panorama.

Architectural drawing on tracing paper showing isometric section, in scale 1:20, of the roof structure of the graduation hall for Strathclyde University. It includes the whole construction details for the central area of the hall's roof including the skylights. This sheet also shows the design of the heating system including the warm air input presented in red , and the extract air presenting in blue. For presentation purposes, this sheet has been drawn to be attached below the fourth item on the right hand side to complete the whole presentation panorama. Note: the roof structure comes with scale 1:100, the correct and actual scale shown in this drawing is 1:20.

Architectural drawing on tracing paper related to the design of Project 1 including the third floor plan and fourth floor plan in scale 1:100. It shows the design of the third floor plan indicating the functional spaces for three flats. Each flat has: 2 bedrooms, kitchen, living & dining room, 2 bathrooms, storage, and balcony. The areas of these flats are smaller than the second floor. It also shows the design of the fourth floor plan which has three flats with the same number of spaces but with areas that are smaller than the third floor flats.

Architectural drawings on tracing paper related to the design of Project 1 including north elevation in scale 1:200, and long section in scale 1:100. The north elevation shows the design of the main building mass, height, and external materials. The long section shows the floors' main structural elements: floors, slabs, and staircase. These drawings have no indication of the types of materials used.

Architectural drawing on tracing paper related to the design of Project 1 including south elevation in scale 1:200, and an isometric in scale 1:100. the design of the south elevation presents the main building mass, height, and external materials. These drawings have no indication of the types of materials used, however it gives the outline of the main design concept. It also shows how the building fits with the surroundings landscape. The isometric shows the building in its three dimensional view representing the final shape of the building.

Architectural drawing on tracing paper related to Housing design project 2 representing block 2 corner pub ground floor plan (lower level) in scale 1:200. The block's layout takes a triangle shape. The pub fills one of the triangle corner with different window styles. Flats are located along the block's outer sides surrounding an inner courtyard, with flats indicated: 3P, 2P, 1P, and 5P. There are two main entrances to the courtyard which consists of cars parking, closed gardens for the ground flats, and children's play area.

Architectural drawing on tracing paper related to Housing design/project 2 represents block 2 corner pub interior south elevation and cross section in scale 1:200. The elevation show the building façade elements from the inner courtyard. This drawing gives a clear image of the site typology that affected the continuity of the block's floors plan levels and reflects that on the skyline of the building across the block. There is no indication of the finishing materials nor the height of the buildings.

Architectural drawing on tracing paper related to Housing design/project 2 represents block 2 'corner pub' elevation facing Raeberry St., internal court elevation, and cross section in scale 1:200. The cross section shows the differences in the site's levels and how the ground topography affects the design of the main entrances to the courtyard. This section shows the ratio of the building height to the opened space span. The architect used colour on part of the elevation to give an idea of the final look of the building facades.

Architectural details drawing on tracing paper related to Housing design/project 2 represents Block 4P and its connection with P2 through the third and forth floor plans all in scale 1:50. The third floor has four symmetrical flats. The main entrance to Flat 4P leads to two bedrooms and a staircase to the upper floor which consists an open living room/dining room with an open kitchen and two bathrooms. The cross section shows the main structural elements of the building construction system. On the fourth plan the roof of flat 4P appears with its skylight windows.

Architectural details drawing on tracing paper related to Housing design/project 2 represents Block 4P and 2P elevations in scale 1:50. Both the street and the court elevations are in coloured rendering to identify finishing materials used. The facades are designed to reflect the floor plans and their interior spaces. The elevations are in the same traditional style of most residential buildings in the city.

Architectural drawing on tracing paper consisting of the upper floor plan and the basement floor plan, scale 1:200, of a new graduation hall at the University of Strathclyde. The upper plan design shows: the upper lounge looking down to the main hall with its double volume, the organ's position, the cleaner's store, vertical circulation, and other services. It also shows the upper plan of the external lecture theatre which consists of the upper display space and the project's position. The main structural system is based on cylinder columns supporting the roof, while the basement floor plan includes the plant room, exhibition storage chamber and other services. It also shows the connection between the hall basement and the cooling fountain.

Architectural drawing on tracing paper related to the design of Project 1 including the fifth floor plan and sixth floor plan in scale 1:100, showing the design of the penthouse flat, indicating its functional spaces divided into two levels. The fifth floor shows the first level of the penthouse including one bedroom with other facilities. The second level based on the the sixth floor including one bedroom with facilities but is larger in area than the first level on the floor below. The penthouse is located at the central point of the floors' plans and raised in the building height leaving the right and left wings of the building lower than the centre.

Architectural drawing on tracing paper related to Housing design/project 2 represents block 2: corner pub and its ground floor plan (upper level) in scale 1:200. This block layout takes a triangle shape. The pub fills one of the triangle corner with several semi-circular façade windows. Flats are located along the block's outer sides surrounding an inner courtyard. The flats are indicated: 4P, 2P, 3P, and GP. There is just one main entrance from the main street to the inner courtyard/upper level, which consists of a picnic area and children's playground.

Architectural drawing on tracing paper related to the design of Project 1 including east elevation in scale 1:200, and cross section in scale 1:100. It shows the design of the east elevation, its main building mass, height, and external materials. The cross section shows the floors' main structural elements: floors, slabs, and staircase. These drawings have no indication of the types of materials used nor height dimensions, however it gives the outline of the main design concept. It also represents how the building fits with the surrounding landscape.

Architectural drawings on tracing paper of a housing design/project 2 including floors plans, elevations, sections, and detailed drawings.

Architectural drawing on tracing paper related to the housing design/project 2 showing the site plan in scale 1:1250, representing its main blocks with the north sign. The new blocks for the housing design project have been coded with numbers and given titles, as below:

• 1: students' hostel;
• 2: corner pub;
• 3: nursery school;
• 4: tenement with G-floor shops;
• 5: public building/shops;
• 6: flats;
• 7: new housing;
• 8: terraced housing;
• 9: public building/shops.

The architect used shading to give an idea of the height of each new building within the site plan.

Architectural drawing on tracing paper related to Housing design project 2 representing block 2 corner pub, a typical floor plan for each of the first, second, and third floors in scale 1:200. The block's layout takes a triangle shape. It shows the different levels on one side of the block affected by the site's topography which results in a discontinuity of the same floor level for the three triangle sides. Flats are indicated: 5P, 3P, 2P, and GP. Each flat shows the main functional spaces, in addition to the main vertical circulation of the other flats within the blocks.

Architectural drawing on tracing paper related to Housing design/project 2 represents Block 4P flats and their drawing details including ground, first, and second floor plans all in scale 1:50. Each floor has two symmetrical flats. Each flat consists of two bedrooms, living room and dining room with an open kitchen, and two bathrooms. A central main entrance connects the main street with the back yard including the services shafts as well as showing the design of the flooring tiles. The cross section shows the floor height and the main staircase. The architect used the ceiling of the main entrance to add some decoration using some hanging plants to give the central volume a sense of environmental quality effect. The section also shows the main structural elements but without any indications of material types.

Architectural drawing on tracing paper showing the site plan of a new graduation hall at the University of Strathclyde in scale 1:1000. The site plan has no street names, however, it is easy to identify the location of the new graduation hall as the site plan shows how the new hall is connected with Barony Hall. The North sign is present on this material. It also shows the design of the new landscape that goes behind the site boundary to make the new hall integrated within the main University campus.

Architectural drawing on tracing paper consisting of the elevation of the new hall from the Cathedral Square façade, and from the west elevation, all in scale 1:200. The Cathedral square elevation shows the new hall from Castle Street presenting the external view of the new hall with Barony Hall and how the new architectural style differs from the traditional building style. There are no indications about the material types used within the new design. The main idea of the new hall is in its building height which did not dominant the skyline of the campus building and Barony Hall which is still standing to be the focal point of the site. The cross section shows the main hall and its functional spaces in its vertical dimension with the structural elements of the interior columns and the central skylight.

Architectural drawing on tracing paper related to housing design/project 2 showing the site plan in scale 1:1250, representing the main housing blocks in an isometric birds-eye view. This site plan gives an idea of the built spaces in relation to the open spaces. However, there is no indication of street names or existing buildings.

Architectural drawing on tracing paper related to Housing design/project 2 representing block 2 corner pub fourth floor plan in scale 1:200. It shows the maisonette plan of flat 7P and its main functional spaces and how it relates to its upper level. The plan also includes other flats for the same block with their main vertical circulation.

Architectural drawings on tracing paper of project 3/fourth year to design a new graduation hall at the University of Strathclyde. Includes site plan, floors plans, elevations, and sections.

Architectural drawing on a tracing paper showing the ground floor plan, scale 1:200, of a new graduation hall at the University of Strathclyde. The ground plan design shows the main functional spaces for the new hall: the main hall, professional entrance, the building entrance, kit staff, stage staff, chair staff, and other services. For the exterior spaces, the plan shows the external spaces attached with the new hall, like: permanent exhibition, lecture theatre, temporary exhibition, bar, reception, and university bookshop. It also shows the design of the landscape.

Architectural drawing on a large rolled tracing paper including site plan, cross section, axonometric, and hinged elevational projection. The site plan is 1:500 showing the location of the new building and its position on the corner of the site. The cross section is in scale 1:100 showing the main functions for each floor and their connections to the outdoors through opened balconies. It also shows the main structural system. There are some spaces with double volume and looking down to the floor below. This large rolled sheet also includes a hinged elevational projection in scale 1:100, which is drawn as a panorama presenting the new building elevation and its position in the point of the existing buildings on Clyde Street and Bridgegate Street. It shows the contrast between the design traditional style of the existing building with their rich architectural details against the modern style design of the new building.

Architectural drawings on rolled greaseproof sheets to study the design of The Third Eye Centre in Glasgow as a side project which had been directed by the tutor of the third full-time year course. It consists of two sheets, a large rolled sheet, and a small rolled one. Greaseproof sheet has been used due to its cheap cost, stated by the architect.

Architectural drawings on a large rolled greaseproof sheet to study the design of The Third Eye Centre in Glasgow as a side project which is directed by the tutor of the third full-time year course. This large rolled sheet consists of the architectural drawing of the building's ground floor plan in scale 1:100 showing its main functional spaces. It also consists of an enlarged part of the ground floor taken from the front side of the building with its upper floor plan, both in scale 1:50. This sheet also includes a sectional perspective in scale 1:20 taken from cash desk booking focal point looking towards its both sides to upstairs floor. This drawing consists of several human figures with humourous comments to give a sense of the real life of this social space. The rolled sheet also includes a coloured drawing of the front façade in scale 1:20, where the architect coloured this drawing from the back of the sheet.

Architectural drawings on tracing paper of housing design project 1 including floors plans, elevations, sections, and detailed isometric.

Copy of architectural drawing on a paper sheet showing the design of the plan and elevation of entrance screen of the Third Eye Centre, in scale 1:20. This material made by Boswell Mitchell & Johnston Architects & Planning Consultants in Feb 1975, and has a reference number of 954/33. It has been used by the architect to study the existing building before making the new changes.

Architectural drawing on tracing paper related to the design of the Housing/Project 1 including the site plan in scale 1:200. It shows how the new building fits within the urban site of the selected location. This drawing has no indication to the names of the streets nor the existing buildings, therefore the location is unknown. North sign has been added to the drawing. The new building has been highlighted with hatched lines in grey colour.

Architectural drawing on tracing paper related to the design of Project 1 including the first floor plan and second floor plan in scale 1:100. It shows the design of the first plan indicating the functional spaces for three flats. Each flat has: 2 bedrooms, kitchen, living & dining room, 2 bathrooms, storage, and balcony. It also shows the design of the second floor plan which has three flats with the same number of spaces but with areas that are smaller than the first floor flats.

Architectural drawing of the fourth floor and basement plans on tracing paper in scale 1:100 showing the design of a sports council headquarters building in its final design stage. The fourth floor consists of: caretakers flat, terrace, vertical circulation, plant room, and other services. The basement plan consists of: printing section, press offices, vertical circulation, plant room, and other services.

Architectural drawing on tracing paper of a long section in scale 1:100 showing the design of a sports council headquarters building in its final design stage. This drawing seems to be the first draft of the long section (ref: DC 121/5/3/7). It isn't a copy, but maybe the first attempt from the architect to study the design of the building in its cross vertical section.

Material created during Christopher Platt's fourth year of studies including the full time (CF4) projects relating to housing design, and detailed drawings.
Full time year tutor: Peter McGurn.

Architectural drawing on tracing paper related to the design of Project 1 including ground floor plan and basement floor plan in scale 1:100. It shows the design of the ground plan indicating the functional spaces of the caretaker's flat and other spaces for communal purposes. It also includes the design of the landscape within the site, the outdoor spaces, trees, outdoor patio shades, and steps.
It also shows the design of basement floor plan indicates parking and plant presenting the layout of the car parking and its main entrance, staircase and lift, but without any indication to the design details.

Architectural drawing on tracing paper of long section in scale 1:100 and two other details section in scale 1:20 showing the design of a sports council headquarters building in its final design stage. The long section shows the structural system of the new building and its connection to the existing sport hall. The floor heights with their main construction elements show the names of each functional spaces. The two other sections are more in detail indicating the materials used for floor slabs, ceilings and walls.

Architectural drawing on a rolled greaseproof sheet to study the design of the front elevation of The Third Eye Centre, in scale 1:20. This drawing seems to be the first sketch as an attempt to present the main features of the façade. This sheet has been coloured from the back. The changes the architect made can be easily distinguished from the final submission shown within the large rolled sheet.

Copy of architectural drawing on a paper sheet showing the main indoor spaces of the ground floor plan of the Third Eye Centre, in scale 1:20. This material has no reference number, however, it seems that it comes from the same source of the previous item (Boswell Mitchell & Johnston Architects & Planning Consultants in Feb 1975). It has been used by the architect to study the existing building before making the new changes.

Copy of architectural drawing on a paper sheet showing a cross section of the Third Eye Centre, in scale 1:20. This material has no reference number, however, it seems that it comes from the same source of the item DC 121/5/4/3 (Boswell Mitchell & Johnston Architects & Planning Consultants in Feb 1975). It has been used by the architect to study the existing building before making the new changes.

Architectural drawing on tracing paper using Rotring black ink pen representing the final design of the south elevation and the north elevation in scale 1:100. The architect used a technique to render this elevation, mainly walls with horizonal lines leaving the window glasses as plain transparent areas. He also used Zip-A-Tone for window shadings. The same technique has been used to make the trees transparent figures to show the architectural elements behind them. The design of both elevation is based on the idea of solid and transparent between ground floor and upper floor giving the sense of lifting the upper floor by the cylinder columns, while the central glass dome appears to be the focal point.
The long section (scale 1:100) shows the structural system and constructional elements supporting the different indoor spaces and the variety of shapes relating to the functions of those spaces. The architect used figures to show the scale of the school building in relationship to people.

Architectural drawing of the ground floor plan on tracing paper in scale 1:100 with free hand sketches in scale 1:200, showing the design of a sports council headquarters building in its final design stage. The ground floor consists of: sporting exhibition audio and visual displays, cafeteria, main entrance with vertical circulation, sports hall, and other services.